HP AdvanceStack Switches and Bridges



Quick Scroll to:

HP AdvanceStack switches and bridges provide scalability and deliver high performance for existing and future networks.

Performance at the workgroup, department, or campus level

HP AdvanceStack switches improve network performance by increasing the number of simultaneous communications on the network. Fully compatible with existing 10Base-T infrastructure and LAN adapters, they allow trouble-free upgrades, guarantee investment protection, and minimize network disruption. For smaller networks, HP AdvanceStack bridges provide a cost-effective solution for reducing network congestion.

Integration of 10-Mb/s and 100-Mb/s Ethernet networks

As networks grow, 100-Mb/s workgroups or nodes are added to existing legacy networks that typically operate at 10 Mb/s. With HP AdvanceStack switches, these mixed 10- and 100-Mb/s Ethernet networks can be easily and seamlessly integrated into one environment.

An alternative to local routing

The development of a router-based network often means a huge investment in time and money on network design and device configuration. HP AdvanceStack switches are plug-and-play devices; in most cases, they do not require any configuration at all. HP AdvanceStack switches offer a viable alternative to most of the segmentation needs currently fulfilled by local routers.

HP provides a broad range of switches to meet your networking needs

Maximum uptime

HP AdvanceStack switches and bridges improve network availability by providing redundancy in the event of device or link failure. With proactive management provided by SNMP and EASE (Embedded Advanced Sampling Environment) agents, these devices ensure that maximum uptime is available for the network. All switches and bridges are backed by an industry-leading three-year onsite warranty and follow HPís tradition of excellent quality, service, and support.

Optimized network design

Switched environments, unlike those based on shared technologies, require careful design of the network topology to ensure that key nodes are placed at the right location. HPís solution allows simultaneous and continuous traffic monitoring on each segment. It provides a list of ìtop talkersî and communications links, so that you can move nodes from one segment to another to achieve optimum performance. This solution is based on the cost-effective HP EASE traffic sampling technology, which is included in all HP network manageable products.

Safe buy

HP AdvanceStack switches are designed to ensure seamless network evolution. They offer:

  • Full scalability, so that you can add connectivity as your network grows

  • A wide choice of technologies that allows you to upgrade your workgroups at your own pace

  • Media flexibility for a variety of topologies

Choosing the most suitable solution for your network

Today, Hewlett-Packard supports 100VG-AnyLAN, 100Base-T, FDDI, and Ethernet switching for building high-performance workgroups and interconnected workgroups. The combination of these complementary technologies allows Hewlett-Packard to offer a wide range of network solutions.

HP AdvanceStack Switches

HP AdvanceStack Bridges

HP AdvanceStack Switches: Comparative Features

Switches HP J3125A Switch 200/
HP J3126A Switch 100
HP J2980A
10/100 Switch-16
HP J3100A
Switch 2000
HP J3101A
Switch 2000
Bundle
Configuration:
-ModularityNoPartialFullPartial
-Configuration (factory-installed ports)16 10BT ports,
2 100VG (Switch 200),
1 100BT (Switch 100)
16 10BT ports8 10BT ports,
2 100VG ports
-Available
expansion slots
02 slots6 slots3 slots
-Modules
(optional)
2 100VG ports,
1 100BT port
4 10BT ports,
2 100VG ports,
1 FDDI port,
4 10BF ports
4 10BT ports,
1 100VG ports,
1 FDDI port,
4 10BF ports
-Connectivity:
10Base-T






100VG




100Base-T

RJ-45





RJ-45 (1 port uplink and 1 port downlink)


RJ-45

RJ-45,
1AUI (1 RJ-45 disabled)



2 transceivers/
module for RJ-45, Fiber, DB9

RJ-45,
UTP Cat. 5

RJ45,
1 transceiver/
module for BNC, Fiber, or AUI
(1 RJ-45 disabled)

2 transceivers/
module for RJ-45, Fiber, DB-9


RJ-45,
UTP Cat. 5;
Fiber
(100BaseFX)***

RJ-45,
1 transceiver/
module for BNC, Fiber, or AUI
(1 RJ-45 disabled)

2 transceivers/
module for RJ-45, Fiber, DB-9
Performance:
Backplane
speed
N/A520 Mb/s1 Gb/s1 Gb/s
Latency29 µs41 µs10 µs**10 µs**
Address
table size
4000100001000010000
Full duplex
Port trunking
Advanced Features:
Spanning tree protocol
Packet filtering
Broadcast
threshold
Virtual LAN
Availability:
Hot swappable module
Redundant
power supply
Redundant fan
Management:
LEDs
RS-232
console port
Telnet
SNMPIPIPIP/IPXIP/IPX
RMON
EASE
Password
protection
LAN analyzer support
Rack space
required
4.4 cm (1.75 in)8.8 cm (3.5 in)17.6 cm (7.0 in)17.6 cm (7.0 in)
Warranty:3 years (onsite)3 years (onsite)3 years (onsite)3 years (onsite)

**Last bit in, first bit out for 64-byte packet size.
***Available 1st half 1997.


HP AdvanceStack Accessories

DescriptionHP J2980A 10/100 Switch-16HP J3100A Switch 2000HP J3101A Switch 2000 Bundle
100TX Transceivers (J3192A, J3193A)
10-Mb/s Transceivers (J2606A, J2607A, J2608A, J2609A)
100VG Transceivers (J3027A, J3028A, J3030A)
Redundant Power Supply (J3136A)


HP AdvanceStack Bridges: Comparative Features

DescriptionHP 28681A
Bridge LB
HP 28673A
Bridge MB
HP 28674B
Bridge RB
Ports:
AUI/BNC111
-AUI only11
WAN1**
Performance:90% of media speedMedia speedMedia speed
Address Table Size:256 entries512 entries512 entries
Operating Modes:LearningLearning
Secure
Bridge off
Learning
Secure
Bridge off
Management Capabilities:
-Spanning tree protocol
-Wildcard filters22
-LEDs
-RS-232 console port
HP EASE traffic sampling
SNMP/IP/IPX
Rack Space Required:4.4 cm (1.75 in)4.4 cm (1.75 in)4.4 cm (1.75 in)
Warranty3 years (onsite)3 years (onsite)3 years (onsite)

** HP 28674B includes a WAN (synchronous) interface cable. Select the cable type by ordering the appropriate option:
Option 001 for cable V.35, Option 002 for RS-232, Option 003 for X.21, and Option 004 for RS-422.

HP AdvanceStack Switches and Bridges: Specifications and Standards

Product Specifications
DescriptionHP 28681A Bridge LB

HP 28673A Bridge MB

HP 28674B Bridge RB
HP J3125A Switch 200

HP J3126A Switch 100
HP J2980A 10/100 Switch-16HP J3100A Switch 2000
Environmental
Characteristics:
-Operating Temperature:
0∞ C to 55∞ C
10∞ C to 40∞ C
-Relative Humidity:
15 to 95% @ 40∞ C
noncondensing
8 to 80% @ 40∞ C
Physical
Characteristics:
-Dimensions42.6x23.5x4.4 cm (16.8x9.3x1.7 in)44.5x30.0x7.6 cm (17.5x11.0x3.0 in)27.9x43.2x33.0 cm (11.0x17.0x13.0 in)44.0x29.0x17.6 cm (17.3x7.0x11.7 in)
-Weight2.7 kg (6.0 lb)4.3 kg (9.5 lb)9.0 kg (20.0 lb)9.0 kg (20.0 lb)
Electrical
Characteristics:
-Voltage:
100-120 Vac;
200-240 Vac
(Automatically adjust to any voltage)
-Current0.5 A max;
0.4 A max
0.5 A max;
0.4 A max
0.5 A max;
0.4 A max
2.5 A
-Frequency: 50/60 HZ; 50/60 HZ


Standards
DescriptionHP 28681A Bridge LB

HP 28673A Bridge MB

HP 28674B Bridge RB
HP J3125A Switch 200HP J2980A
10/100 Switch-16
HP J3100A/
HP J3101A
Switch 2000
Communications:
-IEEE 802.3 Type 10Base-T
-IEEE 802.3 Type 10Base2
-IEEE 802.3 U 100Base-TX
-IEEE 802.1 Spanning Tree Protocol
-IEEE 802.12 for 100VG
-CCITT V.35Bridge RB only
-FDDI**
Safety:
-UL 1950
-CSA 950
-Verified to IEC 950/EN 60950
-Certified to
NOM-019-SCFI-1993
Emissions:
-FCC Part 15 Class A
-CISPR-22Class B for LB,
Class A for MB/RB
Class AClass AClass A
-EN 55022Class BClass AClass AClass A
-VCCIVCCI Class 1 for LB/MB,
VCCI Class 2 for RB
VCCI Class 1VCCI Class 1VCCI Class 1
Immunity:
-ESD:
IEC 801-2 (1991) 3 kV CD,
8 kV AD
-ESD: 55024-2
-Radiated Immunity:
IEC 801-3 (1984) 3 V/m
IEC 801-4 (1988)
0.5 kV signal line
1.0 kV power line
Management:
-SNMP Version 1
-Standard MIBs supportedMIB II, BridgeMIB IIMIB II, BridgeMIB II,
RMON 1,
Bridge, VG, VLAN,
FDDI

** FDDI: IEEE 802.1H Translation Bridging, IP fragmentation FFC791, SNMP 7.3.


Download a printable copy of this datasheet in Adobe Acrobat pdf format (717 Kb). Click here to get the Adobe Acrobat Reader.

Imagemap Icon Bar
Hewlett-Packard Company
Roseville Networks Division
8000 Foothills Boulevard
Roseville, California 95747-5551
U. S. A.